SST Mesh on Plastic Support

Woven mesh from SST, titanium, hastaloy, etc., 35µ-3,000µ that is heat welded on plastic ribs (PVC, CPVC or Polypropylene). Practical & economical solution for a wide range of water filtration applications. Excellent pressure rating, very high bursting pressure and very good chemical resistance. Disadvantages are that the hole size may shift over time and that the plastic ribs that are used for mesh support are blinding about 40% of the effective screen area. Limited temperature ratings to 200°F.

SST Mesh on Perforated Basket

High Performance Screen

Woven mesh from SST, titanium, hastaloy, etc., 2µ-3,000µ are diffusion bonded (sintered) on support mesh (drainage member) and on a perforated SST basket. The support mesh increases the screen open area by about 40%. The hole size will not change over time. Very high open screen area ratio, very good pressure rating, good bursting pressure rating and chemical resistance. Very high temperature ratings to 250°F.

Vee Wire, Wedge Wire

Vee shape wires from SST, titanium, etc. 25µ-3,000µ that are spirally wound & welded on support rods. Rigid & very strong construction that will not flex or give to backwash force. Only two point particle contact. Very high consistency. Ideal for fibrous material. The slots will not shift or change over time. Good working pressure and bursting pressure. High temperature ratings to 300°F.

1″ – 2″ Electric Ball Valves

Automatic Filters Inc. is proud to announce the 1″ , 1.5″, & 2″ Electronic Ball Valve. The electric ball valves feature:

• Compact design
• Manual override
• 1.5 sec actuation
• Full port
• 1000 PSI rating
• ISO Mounting: F05
• Cv=68 & 376

Documentation

3″ & 4″ Electric Butterfly Valves

• Compact design
• Manual override
• 1.5 sec actuation
• 3″ – 150 psi rating Cv=720
• 4″ – 50 psi rating Cv=1366

Documentation

2″ Pneumatic Ball Valve

Pneumatic Ball Valves provide quick valve actuation by utilizing compressed air. Valves Feature:

• Sizes 1/2″ through 2″ in full port stainless steel
• Designed for economical automation, featuring a machined mounting pad for direct mounting of pneumatic actuators
• O-ring loaded seat rings for reduced torque and longer seat life
• Temperature rating from -20°F to +400°F
• Pressure rating to 900 psi at 100°F
• Full compliance with ISO 5211 to provide heavy stem designed for direct actuator-to-stem drive

Documentation

2″ Dual Chamber Flush Valve

• Threaded 2″ FNPT Connections
• Diaphragm Controlled
• Solenoid Actuated

Documentation

1″ SST Flush Valve

• Threaded 1″ FNPT Connections
• Diaphragm Controlled
• All Stainless Steel Components
• Solenoid Actuated

Documentation

3″ & 4″ Hydraulic Flush Valves

Hydraulic flush valves are solenoid actuated and feature:

• Sizes: 3/4″-12″ in globe or angle patterns.
• Pressure range: 7-225 psi
• Working temperature: up to 80°C (176°F)

Documentation

2″ Single Chamber Flush Valve

Hydraulic flush valves are solenoid actuated and feature:

• Sizes: 3/4″-12″ in globe or angle patterns.
• Pressure range: 7-225 psi
• Working temperature: up to 80°C (176°F)

Documentation

GB8 Electronic Controller

The GB8 controller comes complete with a differential pressure sensor, a backwash counter, and an emergency alarm output. GB8 controllers can control backwashes of 4, 8, 12, or 16 filters in succession. The filters can be cleaned in 3 different modes: D/P, timer, and manual. They are available in 115/230 volts or battery operated 12V.

GB6/7 Electronic Controllers

GB6 and GB7 controllers are complete with a differential pressure sensor, a backwash counter, and an emergency alarm output. GB6 controllers backwash a single filter, while GB7 controllers control up to two filters simultaneously. The filters can be cleaned in 3 different modes: D/P, timer, and manual. They are available in 115/230 volts or are battery operated 9V/12V.

GB6-B Electronic Controller

Complete with a D/P switch, a programmed PC, and two 9 volt batteries, the GB6-B controller combines many convenient features to manage your filter without the need for an external power source. The filter can be cleaned in 3 different modes: D/P, timer, and manual.

GB5-B Electronic Controller

Complete with a 3 – way latching solenoid, a D/P switch, a programmed PC, a 9 volt battery, the GB5-B controller combines many convenient features into a compact integral unit. The filters can be cleaned in 2 different modes: D/P and manual.