This filter series has been discontinued and replaced by the LPF Series Water Filters.
HDL Series

HDL Series

NOTE: This filter series has been discontinued.

TEKLEEN® is proud to introduce its very low pressure line of fully automatic self-cleaning water filters with working pressure as low as 12 psi up to 150 psi and filtration down to 35µ. They are available in a wide range of industrial configurations and are designed and manufactured in accordance to ANSI and ASME requirements. ASME U stamp is an option. Sizes range from 3" - 24", flow rates from 10 - 10,000 gpm, screen mesh from 35µ - 3,000µ.

HDL filters include a unique electric-motor-driven dirt collection mechanism that rotates while advancing and reversing without the use of any hydraulic-driven-motor and piston mechanism.

Electrical requirements are 1/2 hp, 3 phase 220/440 VAC and 50/60 HZ. The filters are available in stainless steel, carbon steel with powder epoxy coating and titanium. Clean filter pressure drop with 100µ screen is less than 1 psi at the rated flow of the filter.

We're Here to Help!

Let us know what your filtration needs are and we'll design the best solution for the job.

Fill out an Application Datasheet to begin.

Application Datasheet
Filter Model Flange Size
(in)
Screen Area
(sq ft)
Max Flow
(gpm)
Empty Weight
(lbs)
Cut Sheet Installation Layout
HDL3-LP 3.0 3.3 300.0 0.0 DWG | PDF DWG | PDF
HDL3-P 3.0 1.7 200.0 0.0 DWG | PDF DWG | PDF
HDL4-P 4.0 3.3 500.0 0.0 DWG | PDF DWG | PDF
HDL6-LP 6.0 3.3 800.0 0.0 DWG | PDF DWG | PDF
HDL8-LP 8.0 4.9 1320.0 0.0 DWG | PDF DWG | PDF
HDL8-P 8.0 3.3 1320.0 0.0 DWG | PDF DWG | PDF
HDL10-P 10.0 4.4 1750.0 0.0 DWG | PDF DWG | PDF
HDL12-P 12.0 6.6 2630.0 0.0 DWG | PDF DWG | PDF
HDL14-P 14.0 7.4 4000.0 0.0 DWG | PDF DWG | PDF
HDL16-LP 16.0 11.0 6000.0 0.0 DWG | PDF DWG | PDF
HDL20-SP 20.0 22.0 10000.0 0.0 DWG | PDF DWG | PDF
HDL24-SP 24.0 22.0 10000.0 0.0 DWG | PDF DWG | PDF